Bilco Doors often need to be sanded and coated with a rust proofing primer.

 ***************************************************

Handrails often rust and need much sanding  to ready them.

 **********************************************

There was a lot of mildew and flaking on this hand rail.

I sanded and scraped off all loose paint then applied Rustoleum Rusty Metal Primer.

Finally I applied Rustoleum Gloss Black.

***********************************************

This iron handrail had similar rust and flaking paint.  The best way to prep it was wire brushing followed by sandpaper and steel wool.

The metal was in good shape but needed a good cleaning.

I applied Rustoleum Rusty Metal Primer from a spray can.  I find that this is an excellent product to use on surfaces that are difficult to clean.

It may take two coats of a good exterior paint, especially for the bright colors.

 ***************************************************

 **********************************************

  The hand rail was pressure washed.

***********************************************

After priming the wrought iron, I coated it uniformly (several coats) with Rustoleum Gloss Black Spray Paint.  

The finish cures hard and maintains its shine.